banner-top

Faqs

Faqs

Error 1:- Please ensure that Z- Axis Motor USB is connected properly!!!

The above error may arise from the following reasons:- 1. When power supply is off. 2. When MOTOR USB is not properly connected. 3. After switching on the Machine, Motor USB eject by mistake. 4. When loose contact of motor USB cable with machine. To resolve this kind of problems, go through the following steps :- 1. First of all switch-off the machine switch and machine software. 2. Secondly, check all the USB connections whether are properly connected or not, if not then reconnect it or plug in it properly. 3. Lastly, restart the machine.

Error 2:- Please ensure that Projector HDMI is connected properly !!!

There are two ways to resolve such type of errors when occur are as under:- 1. Firstly, hold the start button and click P, then select the extend option. 2. Secondly, right click on Computer Desktop and select- "Intel Graphic Setting" & " Click on- " Display" & select- "Multiple Display" in which after selecting "Extended Desktop" save the profile.

How Frequently does The Machine Require Calibration

It mainy depends on the machine usage. if it is Used For 8 to 10 Hours Daily, Then Calibration May be Requireed after 1 year.

How can we Switch Between Castable and non castable resin

It is Very Simple, You just have to Select the Saved Profile of the desired material. Also a Separate tray for different resin is advisable.

Is leveling required everytime we change a tray?

It is preferable to check the level before you start printing.

Do we have to calibrate the machine when we switch form non castable resin to castable resin ( and vice versa )

No,You Just have to selec from the preset profile.

What is the minimum thickness printable in this machine

we can print upto 0.025mm

Which is the best resin

Every resin has its own specialty.some have better speed.some have better strength while some are a mixture of both. you can select the Resin as per your Requiremnet.

What is the shrinkage factor?

It dependen on the resin property. Usually it is not more than .01 mm. The shrinkage can also be controlled through our software.

What is life of a tray

Life of the tray depends on how you use it, The Tray can be use the best till 3 kgs in non casting resin (GP) and 2 kgs in casting resin (DC)

How many kg can we print on a single tray

Easy 2-3 KGs. But again it depends on how well you maintain it.

What is the wastage ratio

On an average the Wastage ratio is castable 30% And noncastable 40%

Which 3D printer is suitable for me

All the 3D printers have their own advantages, but if you want a printer that has speed and accuracy then DLP with LED light -engine ( projector) is the best.

What is the difference between LCD and LED machine

Both are DLP Machines, but LED has ahigh power light engine which makes printing faster. Also it is very consistent and has alonger life compared to LCD machines.

What is the advantage of DLP LED machine over MJP machine

There are many advantages, but to name a few 1) DLPLED give much faster output compared to MJP.2) You can use both castable and non -castable material in the same machine. 3) The cost of output is less. 4) low maintenance cost. 5) Smoother finish ETC. 6) Low Machine cost.

What is the speed of the machine.

Our machines can go upto 1800 layers per hour

can i cast product of 0.3 resin based prints

a lot of it depends on the csting expert,but yes casting is possible till0.2mm

How much does the light engine cost?

The price of the light -Engine depends on market value,it may vary as per market. current market price 3,50,000 INR ( May 2021)

Does Your tray silcone or FEP?

Our tray is made of both silicon and FEP to Give better results and long life.

Can we reuse the resin From the tary and spinner?

Yes we Can reuse the resin

Can the waste material be reused

Material once cured cannot be reused

is auto support possible in your machine

No. Not as of now ,but we are working on it.

How to remove lines in resin after printing?

There is a simple post printing process. you can use tools like buffs.

What is the machine warranty and what all does it cover

Moast of our machines have a 3 years warranty. it covers everything apart from the consumables ( Tray & Resin )

How can we learn to work on DLP machine

we provide a minimum 3 days training once the machine is installed.

What is the best suiteable atmospheric conditions for machine

A maintained temperature of 24 is apt for the machine and also for the resin. The room should not be humid.

is there any need of isolator for the machine

isolators are a must for the machine. It controls earthing of the AC power supply in the machines and hence protects the machine.